亚洲国产高清视频_影音先锋中文字幕资源_91在线|porny|欧美_最近中文字幕视频完整

After spraying the top coat with atomic ash, some traces will appear on the film surface, and even the edge will shrink. So what are the reasons for the shrinkage of atomic ash? Next, Changxing Baodi atomic ash factory will discuss this problem with you. If you are interested in this knowledge, let's have a look.
What are the reasons for the shrinkage of atomic ash?
1. The coating of atomic ash is too thick, and the coating is carried out under the condition of not completely dry, especially when the atomic ash and filler are coated on the junction slope, the drying is relatively slow, and if the coating is carried out under the condition of insufficient hardening, it is easy to produce shrinkage.
2. If the film is too thick, the solvent in the middle layer will etch the interface between the atomic ash and the old film, so it will shrink.
3. The diluent and buffer of the middle film coating and the top coat coating on the top of the atomic ash are used excessively or the coating is diluted too thinly.
Now you know the reasons for the shrinkage of atomic ash! If you want to learn more about atomic ash industry, please pay attention to the official website of Changxing Baodi atomic ash factory www.www.020gzgay.com , we will update more wonderful content for you from time to time.